Ball valve series
The sphere adopts an integrated structure, and the axial positioning of both ends can ensure the concentricity.
Full card buckle design 0 pressure loss design.
The place switch adopts precision connected gold-plated reed to ensure the stability of the on or off signal.
The mechanism seal adopts lateral extrusion seal to solve the problem of end surface deformation.
National invention and many other patents.
The national explosion-proof certification, international IEC, EU AETX certification.
The spherical material adopts imported high-wear-resistant self-lubricating material to ensure the durability, sealing, and dust resistance of the valve.
Performance
The sphere adopts an integrated structure, and the axial positioning of both ends can ensure the concentricity.
Full card buckle design 0 pressure loss design.
The place switch adopts precision connected gold-plated reed to ensure the stability of the on or off signal.
The mechanism seal adopts lateral extrusion seal to solve the problem of end surface deformation.
National invention and many other patents.
The national explosion-proof certification, international IEC, EU AETX certification.
The spherical material adopts imported high-wear-resistant self-lubricating material to ensure the durability, sealing, and dust resistance of the valve.
Technical
|
service substance |
Natural gas, liquefied petroleum gas, air and other non-corrosive gas media |
|
Flow range |
（0～10）m³/h |
|
working pressure range |
（0～15）KPa |
|
working temperature |
-20℃～+55℃ |
|
storage temperature |
-25℃～60℃ |
|
relative humidity |
≤93%RH |
|
pressure loss |
0Pa, flow rate of 10m³ / h (valve tested separately) |
|
Sealability (inside) |
P = 5 kPa, leakage of <0.55 L/h |
|
durability |
No fault after 10,000 consecutive operation |
|
voltage |
DC 2.8～4.5V |
|
Crossing the voltage: DC1.5V |
|
|
working current |
≤60mA |
|
peak point current |
≤120mA |
|
Work resistance |
35Ω ±10%(20℃) |
|
Work inductance |
25.5mH±15%(20℃) |
|
Valve opening / close time |
≤8s |
|
explosion-proof criteria |
In accordance with GB / T3836.1, GB / T3836.4, IEC60079-0, IEC60079-11, IS080079-36, IS080079-37, andExib llB T4GB |
|
Structural support |
Material is polyformaldehyde, the valve sealing material is nitrile rubber |
|
Adaptation of the phenotype |
G6 gas meter |
Dimensions
Online Inquiry
